How to Fit Eddy

Money Back GuaranteeAbout Us



UK Tel:
020 8287 6668

UK FREEPHONE:
08000 337 337

International:
+44 208 287 6668

 

Sitemap


 

Buy Eddy electronic descaler - UK

Buy Eddy electronic descaler - EU
Buy Eddy electronic descaler - USA


How to Fit the Eddy Electronic Descaler

It's easy - As easy as 1, 2, 3 . . . .

Step 1 - Wind coils

Step 1 - Wind two coils of wire (supplied) onto your incoming cold water supply pipe. It does not matter if the pipe is horizontal or vertical, or which way the water flows through the coils.

Step 2 - Plug in coils

Step 2 - Mount the main Eddy unit to a nearby wall or panel using the adhesive pads provided. Plug in the red and yellow cables to the main unit as shown in the instruction manual.

Step 3 - Plug in the power unit provided to a nearby electricity supply. Switch on at the supply and check that all the lights on the Eddy unit are illuminated. That's it . . . . . Easy!

Fit an Eddy water descaler to combat the nuisance
of hard water and limescale in the home

Risk free. 12 month money-back guarantee.
Lifetime guarantee against unit failure !

Introduction | What Makes Water Hard? | Hard Water Regions in the UK | Is Hard Water Bad For You? | How You Can Know If You Have Hard Water
Limescale | Effects of Limescale | Effects of Hard Water | Various Methods Of Water Treatment | A Quick Guide to Common Water Treatment Devices | Benefits of a Limescale-Free House